THE BEST OF THE BEST FOR YOUR OWN BACKYARD ICE RINK 
 
 

 
 
 
To paint on the ice:
 
use tempera paint included in the kit that is not toxic for children and environmentally friendly.

The water needs to be completly frozen and the temperatue should be
below the freezing point (-10°C / 15°F)

Go ahead, Draw!!!.

 
 
 
 

Step 1 : use a marker to trace the outline of
your logo on the ice.

Step 2 : paint the outline of your logo.

Step 3 : paint the inside of your logo.
 
In order to paint using a brush, the tempera paint needs to be as thick as possible.

Step 4 : with a nail, a rope and a marker, trace
the circle of the center ice.

Step 5 : use the roller to paint the circle line or any line you wish on the rink. (red lines, blue lines, goalee line...)

In order to paint using a roller, the tempera paint should be diluted with water to make it more liquid.

Step 6 : once the drawings are completed, use a spray bottle to vaporize a very thin layer of cold water on them. 

This thin layer of ice will seal them.

Be careful not to use hot water because it could dissolve the tempera paint.

Step 7 : apply several layers of water to form a thin film of ice (1/8 in. / 3mm) on the  drawings in order to protect them from skates and shovels.

Let the water freeze between each layer of water.

GET THE SAME RESULT, AND EVEN BETTER.